|
|
|
|
产品[
液态二氧化碳ph中和系统
]资料
如果您对该产品感兴趣的话,可以
产品名称:
液态二氧化碳ph中和系统
产品型号:
根据客户要求定制
产品展商:
greatlakes
简单介绍
ADVANTAGES
No handling of corrosive acid containers,
No corrosion of equipment and facilities from acid fumes,
No dangerous chemical reactions with chlorine,
液态二氧化碳ph中和系统的详细介绍
FOR SAFER
pH CONTROL
in POOLS AND SPAS
Carbon Dioxide CO2 is a natural non-corrosive gas that can be used as a substitute for other acids (such as Muriatic acid HCl ) in chemical treatment of pools and spas.
CO2 is available in standard pressurized gas cylinders. When dissolved in water, it forms carbonic acid H2CO3, a weak acid which can be used to lower the pH of water. and neutralize liquid chlorine.
|
 |
ADVANTAGES
No handling of corrosive acid containers,
No corrosion of equipment and facilities from acid fumes,
No dangerous chemical reactions with chlorine,
Less danger of excessive low pH in water. Because carbonic acid is a weak acid, the lowest pH value that can be reachedis 6.8, even under accidental runaway conditions,
Optional AUTOMATIC SWITCHOVER assures continued control of pH.
CAUTION
CO2 increases the alkalinity of water and is therefore not recommended for applications where high alkalinity is a proble. Total Alkalinity (TA) shoul be maintained between 80 and 125 ppm.
High alkalinity increases acid demand, makes it difficult to lower the pH and may result in the formation of bicarbonate scale,
High alkalinity may be reduced with muriatic acid HCl or dry acid.
SPECIFICATIONS
ASCO SOLENOID VALVE, brass body, 750 psi rating, 1/8" FPT, 110V, 500r 60Hz. For connection to pH output relay of the CHEMTROL®controller.
PVC CHECK VALVE/INJECTOR, 3/8" MPT.
FLOWMETER, 0-40 cfh.
FEED TUBE, 15 ft.
VICTOR SR 311 PRESSURE REGULATOR, factory set at 80 psi outlet pressure, 0-100 scfh flowmeter. Recommended for polls up to 500,000 ga.
OPTION
AUTOMATIC CO2 SWITCHOVER SYSTEM, designed for 2 or more cylinders on the same feed line, one being kept on standby until the first one is empty. The switchover automatically switches to the second cylinder when the pressure gets low. Addiotionally, more than one cylinder can be manifolded on each side of the swicthover to further increas the CO2 supply.
INSTALLATION
The schematic shows the principle of installation with an Automatic Switchover System which is recommended to assure continuous pH control. Control of gas injection is done by connecting the 110V pH control output of the CHEMTROL® controller to the solenoid valve on the CO2 injection line. One or more CO2 gas cylinders can be manifolded together on each line, depending on the feed rate required to maintain proper pH. Select the proper pressure regulator as indicated below according to pool size.
|
|
