1. CLOSED MOTOR ASSEMBLY.
Motor connected directly to pump. Space-saver and cost-effective. |
| Motor Power Range |
90W (0.12HP) to 15kW (20HP) |
| Max Total Head |
50Hz |
85m (278 ft) |
60Hz |
120m (393 ft) |
| Temperature Range |
- 80 degC ( -110 degF ) to 280 degC ( 840 degF ) | |
| MAGPAC series |
META series |
| |
|
|
|
|
| |
|
|
|
| | |
2. OPEN COUPLED MOTOR ASSEMBLY
Motor connected through coupling. For versatile application with broad-band performance. |
| Motor Power Range |
3.7 kW (5.0 HP) to 130kW (175HP) |
| Max Total Head |
50Hz |
90m (295 ft) |
60Hz |
130m (425 ft) |
| Temperature Range |
- 80 deg C ( -110 deg F ) to 450 deg C ( 840 deg F ) | |
|
| |
3. SPECIAL TURBINE VANE (REGENERATIVE) design.
Turbine-Vane lmpeller design realizes HIGH HEAD @ LOW CAPACITY performance with compact design. |
| Motor Power Range |
0.75kW (1.0HP) to 3.7kW (5.0HP) |
| Max Total Head |
50Hz |
65m (213 ft) |
60Hz |
90m (295 ft) |
| Temperature Range |
- 30 deg C ( -22 deg F ) to +150 deg C ( 300 deg F ) | |
|
| |
4. Special HIGH TEMPERATURE(RESISTANT)design.
Models are lined-up for high-temperature service. |
| Temperature Range |
Choice of Max + 280 deg C ( +535 deg F ) & Max +450 deg C ( 840 deg F ) | |
| MAGPAC series |
MAXP series |
|
|
| |
|
|
|
| |
|
|
| | |
5. ANSI standard.
Number of models are available in ANSI B73.1 standard, which enables ANSI retrofit. |
| Motor Power Range |
3.7 kW (5.0HP) to 130 kW (175HP) |
| Max Total Head |
50Hz |
90m (295 ft) |
60Hz |
130m (425 ft) |
| Temperature Range |
- 80 deg C ( -110 deg F ) to 450 deg C ( 840 deg F ) | |
| MAXP series |
MAGPAC series |
|
| |
|
|
|
| |
|
|
| | |
6. ISO standard.
Number of models are available in ISO2858 standard, which enables ISO retrofit. |
| Motor Power Range |
5.5 kW (7.5HP) to 55 kW (75HP) |
| Max Total Head |
50Hz |
90m (295 ft) |
60Hz |
130m (426 ft) |
| Temperature Range |
- 80 degC ( -110 degF ) to 150 degC ( 300 degF ) | |
|
| |
7. VERTICAL configuration.
Number of vertically configured models are also available from SUBMERGEABLE to IN-LINE applications. |
| |
Excerpt Models Only ( Not showing all model available ) | |
|
| |
8. Special HIGH PRESSURE DESIGN PRESSURE
Custom-made high-pressure casing makes endureable at extremely high-pressure process (Please note these are NOT for high-head.). |
| |
Only showing representative models. |
| Design Pressure Range |
| |
|
| |
9. JACKET CASING models
Customary-made models are available with special peripherals such as jacketing (full/half), casing center-support, etc. |
| Temperature Range |
- 80 deg C ( -110 deg F ) to 450 deg C ( 840 deg F ) | |
| MAGPAC series |
MAXP series |
|
|
| |
|
|
| | |