sensonix ce-8e工业电导率控制器

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: sensonix ce-8e工业电导率控制器
产品型号: sensonix ce-8e工业电导率控制器
产品展商: 其他品牌
简单介绍
sensonix ce-8e工业电导率控制器　　　 ■ CHARACTERISTIC ● Equipped with the newly-developed alternating 5-pole sensor. A user can continuously measure the high concentration rate. ● The conductivity-r

sensonix ce-8e工业电导率控制器的详细介绍

sensonix ce-8e工业电导率控制器

■	CHARACTERISTIC
●	Equipped with the newly-developed alternating 5-pole sensor. A user can continuously measure the high concentration rate.
●	The conductivity-rate, temperature and the salt concentration rate of sea-water can be measured. The temperature measurement element is at Pt1000Ω.
●	The standard temperature and temperature compensation can be set optionally. It minimizes the errors which occur due to differences in temperature or components of solution.
●	It corresponds to wide range of voltage in AC90V~260V. Therefore it can be used domestic and foreign markets.
●	It is equipped with the isolated transmission output. And the output range can be measured. Also it can easily be connected with a computer.
●	As the error message is given, the maintenance work can easily be done.
●	The control action at 2 points can be set optionally.

■SENSOR

Quality of material which contacts with solution :	PVC, titanium, SUS316
Temperature of measuring solution :	0～50℃
Pressure of measuring solution :	0～0.5MPa（0～5kgf/cm²）
Cell constant:	about 1,000
Length of lead:	10m（standard）、30m（maximum）

■WIRING TABLE

■SPECIFICATION

Model	CE-8E
Measurement range	1.00/2.00/5.00/10.0./20.0mS/cm (transmission rate mS/cm) 1.00/2.00/5.00/10.00/20.0mS/cm 1000/2000/5000.S/cm (transmission rate S/cm) 0～4.0% (Salt concentration rate)(temperature at 0~40　℃) 0～100 ℃ (temperature)
Accuracy	±5%FS
Control output and Signal output	IC contact point output : 2 points (independent) Contact capacity : AC250V, 3Amax (resistant load)
Transmission output	DC4～20mA input/output isolated type (Transmission output of temperature is not attached.) Maximum load resistance : 500, Straight line ± 0.5%FS
Temperature compensation	Standard temperature at 25℃ (option setting available: 5~95℃) Range of temperature range 0~100℃　　Accuracy ±1%FS
Surrounding condition	The unit itself : -5~40℃　　less 85%RH
Temperature of sample solution	0～50℃
Structure	The unit itself : Panel attachment type to be installed indoor. Sensor : Throwing or screwing type Quality of contacting part : PVC, titanium, SUS316 Length of lead : 10m (standard)
Power supply	AC90～260V　50/60Hz　10W
Weight	The unit itself : About 650kgs
Painting	The unit itself : SPCC Panel : ABS

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

江苏弗里森流体工程技术有限公司电话：18921211009 13771284315 传真：
地址：江阴市澄江中路五号东都国际大厦707 邮编：214400 苏ICP备09022593号-2