GE电机/马达
美国Pulsafeeder(帕斯菲达)
美国broadley james corporation PH电极
PH ORP电极、仪器表
法国多寿dostron比例泵
PARKER 高纯阀门(PTFE/PFA产品)
tescom减压阀,备压阀,电子压力调节器
台湾塑宝super耐酸碱泵及过滤机
日本nikuni尼可尼工业泵
化学搅拌机
水处理搅拌机
美国broadley james ph电极,orp电极,工业酸度计
化学试剂
美国procon高压泵
美国milton roy米顿罗计量泵
美国sandpiper气动隔膜泵
德国verder气动双隔膜泵
shell壳牌V9930润滑油
美国goulds高质清水泵
美国goulds高质流程泵
美国circle seal controls减压阀,控制阀
西班牙itur水泵
西班牙itur船用泵
美国Bell & Gossett泵
美国versamatic气动隔膜泵
管路清洗机
一般国外工业设备
特殊国外工业设备
搅拌器及附件
其他医药/卫生/临床专用仪器
风机
细胞破碎仪/均质仪
产品[

sensonix 计量泵

]资料
如果您对该产品感兴趣的话,可以 sendmsg
产品名称: sensonix 计量泵
产品型号: sensonix 计量泵
产品展商: Great Lakes China
简单介绍
sensonix 计量泵         ■ CHARACTERISTIC ● A small size motor is used and power consumption is low. ● Easy adjustment of fluid amount by eccentric dial ● Splendid discharge accuracy rate and excellent endurance ● High anti-erosion effect on the contact part with water ■ USAGE ● In case that chemicals are poured in water treatment. ● In case that liquid fertilizers are used for water cultivation. ● In case that chlorine is poured into bath or swimming pool. ● For any other purposes of quantitative supply. ■ STANDARD ASSEMBLIES ● Foot valve ● Siphon protection valve/ exclusive of plumbing ● Blade hose in 4m (Teflon in 5m)/ Exclusive of plumbing ● Water drop cover/ Exclusive of TW model ■QUALITIES OF CONTACTING PARTS WITH LIQUID Name of part G(standard) A B S F C Pump head PVC Valve bearing EPDM FKM EPDM EPDM EPDM FKM Ball Ceramic(*FKM) Ceramic SUS316 SUS316 Ceramic(*FKM) Ceramic O-ring EPDM FKM EPDM EPDM EPDM FKM Spring for siphon Hastelloy C Hastelloy C SUS316 SUS16 Hastelloy C Tube Diaphragm Teflon Teflon Teflon EPDM EPDM Teflon ※The quality of T(W)-500N and T(W)-1000N: Balls of only for G-type and F-type are of FKM. ■SPECIFICATION Model Maximum discharge amount ml/min (50/60Hz) Maximum discharge pressur Mpa Connection Output (W) Voltage (V) Weight (about in kg) hose union T-30N 30/36 1.0 φ5×φ9 VP16A plumbing (PVC) 15 100V(single phase) 200V(3 phase) 200V(single phase) *Option 3.5 T-60N 60/72 0.5 T-150N 150/180 1.0 φ6×φ11 25 4.5 T-300N 300/360 0.5 T-500N 500/600 0.5 φ8×φ13.5 60 7.5 T-1000N 1000/1200 0.5 TW-150N 150/180×2 heads 0.5 φ6×φ11 25 8.5 TW-300N 300/360×2 heads 0.5 TW-500N 500/600×2 heads 0.5 φ8×φ13.5 60 13.5 TW-1000N 1000/1200×2 heads 0.3 * The price is offered provided that quality is of G type and a hose is connected. A flange can be connected. * The solution temperature should be set at 0-50℃. (The freezing condition is not acceptable.) * The other motors in type of UL.CSA.EN or in safety device type can be optionally supplied. * If a viscous solution is used, the discharge amount decreases.  


sensonix 计量泵的详细介绍

sensonix 计量泵
Diaphragm Quantitative Pump
 
 
TW-N T-N
 
 
CHARACTERISTIC
A small size motor is used and power consumption is low.
Easy adjustment of fluid amount by eccentric dial
Splendid discharge accuracy rate and excellent endurance
High anti-erosion effect on the contact part with water
USAGE
In case that chemicals are poured in water treatment.
In case that liquid fertilizers are used for water cultivation.
In case that chlorine is poured into bath or swimming pool.
For any other purposes of quantitative supply.

STANDARD ASSEMBLIES
Foot valve
Siphon protection valve/ exclusive of plumbing
Blade hose in 4m (Teflon in 5m)/ Exclusive of plumbing
Water drop cover/ Exclusive of TW model


■QUALITIES OF CONTACTING PARTS WITH LIQUID
Name of part G(standard) A B S F C
Pump head PVC
Valve bearing EPDM FKM EPDM EPDM EPDM FKM
Ball Ceramic(*FKM) Ceramic SUS316 SUS316 Ceramic(*FKM) Ceramic
O-ring EPDM FKM EPDM EPDM EPDM FKM
Spring for siphon Hastelloy C Hastelloy C SUS316 SUS16 Hastelloy C Tube
Diaphragm Teflon Teflon Teflon EPDM EPDM Teflon
※The quality of T(W)-500N and T(W)-1000N: Balls of only for G-type and F-type are of FKM.


■SPECIFICATION
Model Maximum discharge amount
ml/min (50/60Hz)
Maximum discharge pressur
Mpa
Connection Output
(W)
Voltage
(V)
Weight
(about in kg)
hose union
T-30N 30/36 1.0 φ5×φ9 VP16A plumbing
(PVC)
15 100V(single phase)

200V(3 phase)

200V(single phase)
*Option
3.5
T-60N 60/72 0.5
T-150N 150/180 1.0 φ6×φ11 25 4.5
T-300N 300/360 0.5
T-500N 500/600 0.5 φ8×φ13.5 60 7.5
T-1000N 1000/1200 0.5
TW-150N 150/180×2 heads 0.5 φ6×φ11 25 8.5
TW-300N 300/360×2 heads 0.5
TW-500N 500/600×2 heads 0.5 φ8×φ13.5 60 13.5
TW-1000N 1000/1200×2 heads 0.3
* The price is offered provided that quality is of G type and a hose is connected.  A flange can be connected.
* The solution temperature should be set at 0-50℃. (The freezing condition is not acceptable.)
* The other motors in type of UL.CSA.EN or in safety device type can be optionally supplied.
* If a viscous solution is used, the discharge amount decreases.
 


产品留言

Great Lakes China   联系电话:业务一部051086023677 13701521982 节假日:13771284315  传真电话:051086023577
联系地址:江苏无锡    邮 编:214400    粤ICP备05005400号   Google Sitemap   百度新闻   网站管理入口
点击客服QQ/TM号
即时沟通或交流
MSN:  gl-china
Great Lakes China
主营产品:tescom  procon高压泵  米顿罗计量泵  verder  塑宝耐腐蚀泵  procon  米顿罗