产品[
法国dosatron金属切削液比例泵DI520
]资料
如果您对该产品感兴趣的话,可以
产品名称:
法国dosatron金属切削液比例泵DI520
产品型号:
DI520
产品展商:
dosatron
简单介绍
来自法国的dosatron水利比例配比泵D310RE,拥有*大比例配比,范围5%-20%,如此大的添加范围完全能胜任任何切削液的配比工作,他的出色表现完全可为车间节省一位熟练的操作工,让您在降低成本的同时又能感受**配比带来的好处。
法国dosatron金属切削液比例泵DI520的详细介绍
运行原理
Dosarton注入泵直接安装在供水管路上,依靠经过的水流作为运行动力。水驱动Dosarton注入泵运行,按照需要的比例将浓缩液从容器中直接吸入并注入到水中。在Dosarton泵内,浓缩液与水充分混合,水压将稀释混合液输送到下游管网。不管供水管路上的水量和压力发生什么变化,所注入浓缩液的剂量与进入Dosarton泵的水量始终成比例。
DI520主要规格参数
注入比例调节范围 5%~20%(1:20~1:5)
运行时水流量范围 10升/小时~1.5立方米/小时
运行水压 0.5~4BAR
浓缩液(母液)注入流量 0.5升/小时~300升/小时
High precision dosing
The DOSATRON water powered dosing pump is a simple and ingenious system that has demonstrated its worth for more than 30 years in about a hundred countries. Installed directly in the water supply line, the Dosatron operates without electricity ; it uses the flow of water as the power source. The water activates the Dosatron, which takes up the required percentage of concentrate and injects it into the water. Inside the Dosatron, the concentrate is mixed with the water, and the water pressure forces the solution downstream. Once adjusted, the dispenser requires no action or external control . The dose of concentrate will be directly proportional to the volume of water entering the Dosatron, regardless of variations in flow and pressure which may occur in the main line. The high dosing precision eliminates all risks of overdosing, thus contributing to respecting the environment.
|  |
适用领域:
环境-卫生-水处理-车辆清洗-金属加工-食品加工-书画刻印艺术-园艺-畜牧等
主要应用:
****-**-清洗-施肥-植保-添加-润滑-PH\TH校正-卫生-絮凝处理-车辆清洗等
安装
规程:在安装Dosarton设备之前,应咨询并符合当地有关的水管理规程。
为达到*佳Dosarton使用效果,请遵守下列我们提出的安装建议:
-根据应用的水质情况,在Dosarton设备的上游位置安装一个过滤器(300目[60微米])。
-每年更换一次注入器密封垫圈。
-经常用清水清洗。
-若要调节注入比例,应先关闭供水管阀门,并使水压降到为零。
-安装必要的保护装置(流量压力调节器等)。避免受到超大流量和压力以及水锤的危害。
-将Dosarton设备安装在整体旁路上。
若想了解其他安装建议,请向我们咨询。